Dissolution Reaction and Surface Modification of UICC Amosite in Mimicked Gamble's Solution: A Step towards Filling the Gap between Asbestos Toxicity and Its Crystal Chemical Features.

This study focuses on the dissolution process and surface characterization of amosite fibres following interaction with a mimicked Gamble's solution at a pH of 4.5 and T = 37 °C, up to 720 h. To achieve this, a multi-analytical approach was adopted, and the results were compared to those previously obtained on a sample of asbestos tremolite and UICC crocidolite, which were investigated under the same experimental conditions. Combining surface chemical data obtained by XPS with cation release quantified by ICP-OES, an incongruent behaviour of the fibre dissolution was highlighted for amosite fibres, similarly to asbestos tremolite and UICC crocidolite. In particular, a preferential release of Mg and Ca from the amphibole structure was observed, in agreement with their Madelung site energies. Notably, no Fe release from amosite fibres was detected in our experimental conditions (pH of 4.5 and atmospheric pO2), despite the occurrence of Fe(II) at the M(4) site of the amphibole structure, where cations are expected to be rapidly leached out during mineral dissolution. Moreover, the oxidation of both the Fe centres initially present on the fibre surface and those promoted from the bulk, because of the erosion of the outmost layers, was observed. Since biodurability (i.e., the resistance to dissolution) is one of the most important toxicity parameters, the knowledge of the surface alteration of asbestos possibly occurring in vivo may help to understand the mechanisms at the basis of its long-term toxicity.

From field analysis to nanostructural investigation: A multidisciplinary approach to describe natural occurrence of asbestos in view of hazard assessment.

The environmental impact of natural occurrences of asbestos (NOA) and asbestos-like minerals is a growing concern for environmental protection agencies. The lack of shared sampling and analytical procedures hinders effectively addressing this issue. To investigate the hazard posed by NOA, a multidisciplinary approach that encompasses geology, mineralogy, chemistry, and toxicology is proposed and demonstrated here, on a natural occurrence of antigorite from a site in Varenna Valley, Italy. Antigorite is, together with chrysotile asbestos, one of the serpentine polymorphs and its toxicological profile is still under debate. We described field and petrographic analyses required to sample a vein and to evaluate the NOA-hazard. A combination of standardized mechanical stress and automated morphometrical analyses on milled samples allowed to quantify the asbestos-like morphology. The low congruent solubility in acidic simulated body fluid, together with the toxicity-relevant surface reactivity due to iron speciation, signalled a bio-activity similar or even greater to that of chrysotile. Structural information on the genetic mechanism of antigorite asbestos-like fibres in nature were provided. Overall, the NOA site was reported to contain veins of asbestos-like antigorite and should be regarded as source of potentially toxic fibres during hazard assessment procedure.

Size characteristics of asbestiform fibers in lung tissue of animals that grazed in areas rich in ophiolitic outcrops in Central Calabria (Southern Italy).

In Calabria (Southern Italy) naturally occurring asbestos (NOA) mainly occurs in the ophiolitic sequences cropping in the Mount Reventino area. The most common type of asbestos detected was the amphibole tremolite; fibrous antigorite and minor chrysotile were also found. The development of asbestos-related diseases depends on, among other things, the morphological characteristics of fibers, length and width, affecting the durability of asbestos fibers in the lung. In this work fifteen lung samples of sheep, goats and wild boars, grazing around the Mount Reventino area were collected and asbestos fibers analysed. Observed fibers (357), of which 97 % were tremolite and 3 % antigorite fibers, were grouped according to species, grazing area and age of the animals. The aim of this work was to highlight any differences among the groupings and to compare our size results with data in literature related to exposed populations. Principal Component Analysis (PCA) highlighted a positive correlation between tremolite fiber length and width and revealed groupings in terms of animal age. The Kruskal-Wallis test showed statistically significant differences between fiber mean widths in young and old animals. 63 % observed asbestiform fibers were longer than 5 µm and 7 % of the fibers were longer than 20 µm (critical fiber length connected to the frustrated phagocytosis by the macrophage). Fibers conforming to the Stanton Hypothesis size (predictor of the carcinogenic potency of fibers) were 1 %. Our size parameters of fibers detected in the animal lungs were in fairly good agreement with literature data for human asbestos exposure to tremolite. These results confirmed that an animal-sentinel system could be used to monitor the natural background of the airborne breathable fibers exposure. In addition, the size correlation of animal-human breathed fibers could be useful to study their potential toxicity. Additional data are necessary for improving the agreement with human exposure data.

Asbestos containing materials in schools of Rome and surrounding area (Italy).

Despite Italy banning use and production of asbestos in 1992, it continues to represent a risk to human health due to its permanence in the places where it was located. The aim of this work is to estimate how many schools in Rome (Italy) have asbestos containing materials (ACM), and to assess whether the location, condition and nature of ACM can influence the level of risk for student health. 3,672 schools were contacted and 1,451 participated to asbestos survey. 692 bulk samples were collected and analyzed by optical and electron microscope and Fourier transform infrared spectrometer. About 16% of the surveyed schools had ACM. Most of the ACM were not accessible to students (water tanks, boiler thermal insulations). Asbestos-cement materials and vinyl floor tiles were the most common non-friable materials found in schools and equipment insulation linings and Bunsen burner gauze mats were the friable ACM found in science laboratories. Measures to prevent or reduce asbestos hazards were applied where necessary. This study allowed to develop the awareness of the asbestos health hazard among headteachers and the need to manage these hazards appropriately. It represents the beginning of a larger study leading to ACM national mapping in schools.

Environmental contamination by naturally occurring asbestos (NOA): Analysis of sentinel animal lung tissue.

Ophiolites are known sources of naturally occurring asbestos (NOA). In Calabria (Southern Italy) NOA are mainly concentrated in the ophiolitic sequences cropping in the Mount Reventino area, in the southern part of the Sila massif, and along the Coastal Chain. The most common type of asbestos identified in the rocks of these areas belongs to the tremolite-actinolite series. Another identified asbestiform mineral is fibrous antigorite belonging to the serpentine mineral group with a minor amount of chrysotile. The purpose of the present study is to evaluate the diffusion of natural asbestiform fibers from NOA using sentinel animals. Fifteen lung samples of sheep, goats and wild boars from Mount Reventino area and two from an area free from NOA were collected. The lung samples were subjected to anatomopathological examination and lung fiber burden analysis by electron microscopy. Abundant tremolite and few antigorite fibers were detected in the lung samples coming from the NOA area. No corpuscle of asbestos was observed. No fiber was found in the two lung samples of sheet from the area free from NOA. These concentrations of fibers per gram of dry weight of lung tissue (f/gdw) ranged from 104 to 106 f/gdw. The asbestos fibers detected in the lungs of the examined animals reflect the geological features of the areas where they grazed and lived. The anatomopathological analysis showed that 60% of the examined animals had macroscopic lesions affecting their lungs. The presence of tremolite fibers in the lungs confirms the diffusion of mineral fibers in the environment and the real advantage of using animal populations in the study areas.

Biosolubility of high temperature insulation wools in simulated lung fluids.

OBJECTIVE: Biosolubility is an important parameter in the understanding of mechanisms involved in pulmonary toxicity of fibrous materials. It can be studied in vitro using models of simulated lung fluids and observing the loss of structural molecules, expressed as dissolution constant (Kdis). The aim of this paper was the study of dissolution behaviour of four wools belonging to high temperature insulation wools (HTIW) in saline solutions simulating lung fluids. METHODS: Four HTIW were studied in saline solutions at pH 7.4 (representative of the extracellular environment) and 4.5 (representative of the intracellular conditions): refractory ceramic fibers (RCF), two alkaline earth silicate wools (AES1 and AES2 with high calcium and magnesium content respectively), and polycrystalline wools (PCW). Size, morphological and chemical changes of fibers were observed by scanning electron microscopy (SEM) with energy-dispersive X-ray spectrometry (EDS) and inductively coupled plasma atomic emission spectrometry (ICP-AES). RESULTS: RCF, AES2 and PCW did not show statistically significant diameter changes. AES1 size distribution shifted to a larger mean diameter suggesting that through dissolution there was a preferential loss of thin fibers at acid pH after 14 days of treatment.Both AES wools showed selective leaching of alkali/alkali earth oxides (incongruent dissolution) at pH 7.4: a fast and extensive selective leaching of calcium for AES1 with complete dissolution of fibers already after 14 days of treatment and a moderate selective leaching of magnesium for AES2. PCW showed some transversal breakage of the fibers in both pH environments (low congruent dissolution). For RCF, the treatment produced uncorroded fibers in both pH environments without chemical changes and fiber fragmentation (no dissolution).The estimated Kdis at physiological pH followed the sequence: AES1 > AES2 > PCW > RCF. All wools had a low Kdis at acid pH suggesting a low dissolution rate of short fibers. CONCLUSION: The leaching process and transverse fragmentation play an important role in the biopersistence mechanisms and pathogenicity of fibers and the Kdis estimate is undoubtedly useful as a preliminary toxicological screening of fibers, especially for developing fibers.

Alkaline earth silicate (AES) wools: Evaluation of potential cyto-genotoxic and inflammatory effects on human respiratory cells.

Biosoluble AES wools are increasingly used since considered not hazardous, however, few toxicity studies are available. We evaluated cytotoxic, genotoxic-oxidative and inflammatory effects of two differently soluble AES wools, AES1 (high MgO percentage) and AES2 (high CaO percentage), on alveolar (A549) and bronchial (BEAS-2B) cells. Fiber dimensions and dissolution in cell media were evaluated by SEM analysis. Cell viability, LDH release, direct/oxidative DNA damage (fpg-comet assay) and IL-6, IL-8 and TNF-α release (ELISA), were analysed after 24 h exposure to 2-200 µg/ml. On A549 cells AES1 induced LDH release, slight direct DNA damage and oxidative DNA damage with very high IL-6 release at 100 µg/ml; AES2 induced higher DNA damage than AES1 and slight oxidative DNA damage. On BEAS-2B cells we found direct DNA damage (higher for AES1) and slight oxidative DNA damage (associated to slight increased IL-6 and IL-8 release for AES1). The higher genotoxicity of more soluble AES2 on A549 cells could be explained by higher respirable fibers % and fiber number/µg found after 24 h in RPMI-medium at 100 µg/ml. The higher membrane damage, oxidative DNA damage and inflammation induced by AES1 in A549 cells could be due to the higher DLG and silica percentage. These findings suggest further investigations on AES toxicity.

Field comparison of two inhalable samplers used in Italy to measure the wood dust exposure.

BACKGROUND: Particle size affects the performance of personal air samplers used to measure dust exposure in the workplace. Few field studies have been conducted for comparing the performance of personal inhalable samplers. OBJECTIVE: To compare wood dust sampling with two inhalable samplers: IOM (Institute of Occupational Medicine) and Italian cone. METHODS: 136 Italian cone/IOM paired samples and 136 passive IOM samples were collected in 30 Italian woodworking industries. The valid number of sample pairs was 114. Ultra-large particles were collected by passive IOM. The sampling membranes were weighed and the size particles were measured. Mass differences in active and passive IOM samples were calculated (IOM-Δ). RESULTS: Statistical analysis of all 114 Italian cone/active IOM paired results showed a significant mass difference (P < 0.05) and no significant mass difference for sanding and cutting woodworking processes. The Italian cone/IOM-Δ paired results consistently showed no statistically significant mass differences in any woodworking processes. Both samplers performed similarly when ultra-large particles mass contribution was not considered. CONCLUSIONS: These findings confirm the presence of ultra-large particles in woodworking. The Italian cone and IOM samplers can be used interchangeably for personal wood dust exposure assessment, when the wood activities produce small-size particles.

Dissolution of glass wool, rock wool and alkaline earth silicate wool: morphological and chemical changes in fibers.

The behavior of alkaline earth silicate (AES) wool and of other biosoluble wools in saline solution simulating physiological fluids was compared with that of a traditional wool belonging to synthetic vitreous fibers. Morphological and size changes of fibers were studied by scanning electron microscopy (SEM). The elements extracted from fibers were analyzed by inductively coupled plasma atomic emission spectrometry. SEM analysis showed a larger reduction of length-weighted geometric mean fiber diameter at 4.5 pH than at 7.4 pH. At the 7.4 pH, AES wool showed a higher dissolution rate and a dissolution time less than a few days. Their dissolution was highly non-congruent with rapid leaching of calcium. Unlike rock wool, glass wool dissolved more rapidly at physiological pH than at acid pH. Dissolution of AES and biosoluble rock wool is accompanied by a noticeable change in morphology while by no change for glass wool. Biosoluble rock wool developed a leached surface with porous honeycomb structure. SEM analysis showed the dissolution for glass wool is mainly due to breakage transverse of fiber at pH 7.4. AES dissolution constant (Kdis) was the highest at pH 7.4, while at pH 4.5 only biosoluble rockwool 1 showed a higher Kdis.

A study on the transfer of heavy methals released by Chinese commercial products.

OBJECTIVES: Studies by The World trade Organization (WTO) and the Organization for the Economic Cooperation and Development (OECD) state that the trade on counterfeit goods corresponds to 10% of the global trade and it is worth 450 billion dollars. In this work we studied the transfer of toxic metals released by some Chinese watches causing significant allergic dermatitis. METHODS: Several samples of dust released from metal parts got collected. Such powders were observed at the Electron Microscope complete with EDAX spectrometer. RESULTS: In all the studied dust samples we identified the following chemical elements: Cu, Ni and Zn. The SEM analysis has identified two predominant phases such as pure nickel and brass alloy (Cu-Zn). CONCLUSIONS: The first metal subjected to cession and to corrosion phenomena is nickel. The main causes of corrosion in the studied materials were due to the presence of chloride ions. Among the ceased metals found in our study nickel is the most dangerous. Scientific evidence now agree that nickel and certain nickel compounds are toxic and highly harmful to human health they indeed cause allergic contact dermatitis (DAC).

Fractionated ionizing radiation exposure induces apoptosis through caspase-3 activation and reactive oxygen species generation.

BACKGROUND: Radiation therapy (RT) is a well established therapeutic modality for the treatment of solid tumors. In particular, post-operative RT is considered the standard treatment adjuvant to surgery since its ability to prolong median survival of patients with malignant astrocytoma has been shown; nevertheless the ionizing radiation (IR) treatment fails in a considerable number of astrocytoma patients. MATERIALS AND METHODS: Using an ADF human astrocytoma cell line the molecular mechanisms involved in the DNA damage induced by fractionated irradiation (FIR) and single IR treatment have been investigated. RESULTS: FIR and single IR treatment inhibited the growth of the ADF human astrocytoma cell line. FACS analysis revealed that FIR treatment, but not single IR treatment, induced growth inhibition associated with the induction of apoptosis. Apoptosis was related to caspase-3 activation and reactive oxygen species (ROS) generation. ROS formation depends on the up-regulation of the cytochrome P450 enzyme gene. On the contrary, 12.5 Gy induced necrotic cell death up-regulating the HSPD1, HSPCB, HSPCA and HSPB1 genes. CONCLUSION: FIR treatment induced cell death through caspase-3 and ROS-mediated apoptosis.